Error code
Thermador oven error code E310
Thermador error code E310: the control module cannot read back what it stored. What the code covers, what to check first, and what it does not tell you — on wall ovens & steam ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E310, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations.
The code
E310
The control module cannot read back what it stored
or call (305) 846-7685
What it narrows down to
Control data memory
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
The code says which half Oven not heating
An oven that lights up, sets a temperature and never gets there — or does nothing at all. On a double oven the code tells you which cavity before anyone opens anything.
- Sets a temperature and stays cold
- One cavity works, the other does not
- A code beginning E1 or E3
In more detail
About Thermador oven error code E310
What this one means
The control module cannot read back what it stored. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
The other ways your machine may say it
The same condition is published under more than one label, because it has been carried across generations of this appliance:
- Three LEDs on the panel blinking out the digits 3, 1 and 0 — how a model with no digital display says it. On that machine, the lights are the code
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The control module
- An option code lost during a supply interruption
Worth doing before you call
- Switch the oven off at the breaker for a minute and back on
Then what
Worth pairing with the mismatched-module code: both are settled by what the control module knows about itself, and both are read off the data plate rather than guessed.
This code is published for wall ovens & steam ovens. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards