ThermadorRepair Miami

13 jobs, with the range behind every figure

What a Thermador repair costs, and what moves the number.

Every figure here is a starting point with its market range printed beside it, not a quote. The exact cost is settled after a diagnostic, because the same code covers a filter you can clean and a pump you cannot — and a number guessed over the phone is either padded or cannot be honored.

  • 13 jobs with a cost page
  • from $95 diagnostic, credited to the repair
  • $135 the least expensive repair here
  • 0 final prices given before a visit

By job

What each repair starts at

Thirteen figures, each against the national range it sits in, what moves it up or down here, and — where it applies — the free thing to try before spending anything at all.

  • Diagnostic visit cost

    What a first visit costs, and why it is the only honest way to price a repair. The fee is credited toward the work when you go ahead, so on a job we carry out it is not an extra line.

    • Credited toward the repair when you approve it
    • The code read — or the blinks counted
    • A second appliance at the same address costs less than a second visit
    What moves this figure
  • Dishwasher drain repair cost

    What it costs when water is standing in the tub — and the honest note that a good share of these end at the filter, which costs the visit and nothing more.

    • National range for dishwasher repair: $100–$300
    • The filter and the hose are free to check first
    • The cabinet panel is what adds time, not the part
    What moves this figure
  • Crystal Dry and drying repair cost

    The most expensive dishwasher repair on this brand, because the drying is a mineral chamber rather than a heating element. Also the one most often not needed at all.

    • Wet plastics are not a repair on any condensation dryer
    • The zeolite chamber is a combined assembly
    • E2120 and E2130 name it before anyone opens anything
    What moves this figure
  • Control board replacement cost

    What a board costs, and the more useful question of whether it is really the board. On this make several conditions name the electronics explicitly, which makes an honest answer easier to reach.

    • National range for mainstream boards: $150–$300
    • Two boards on this equipment, and they fail separately
    • The option code after a swap, which is easy to miss
    What moves this figure
  • Oven repair cost

    What it costs when an oven will not heat or will not hold a temperature. The sensor and the element are different parts at different prices, and the code usually says which.

    • National range for oven repair: $130–$350
    • Sensor $100–$250, element $150–$450 as parts and labor
    • On a double oven the code names the cavity
    What moves this figure
  • Induction cooktop repair cost

    Induction repairs sit above other cooktops because the electronics are the appliance. The good news is that most induction call-outs turn out to be a protection and cost the visit.

    • Induction repairs generally run above $200 nationally
    • Most call-outs are protections, not failures
    • Supply voltage is a real cause and not our repair
    What moves this figure
  • Cooktop glass replacement cost

    The widest range on this site, and one question decides where you land in it: whether the glass is sold separately for your model.

    • National range: $200–$1,000
    • On some models the glass is not a service part
    • The model number settles it in about a minute
    What moves this figure
  • Professional range repair cost

    A Pro Grand or Pro Harmony is two appliances on one chassis, so the honest answer starts with which half has stopped.

    • Dual-fuel repairs nationally: $180–$390 by part
    • The gas half and the electric half price differently
    • Most repairs are done without moving the range
    What moves this figure
  • Refrigeration sealed system repair cost

    The most expensive repair on this site. The figure is built-in refrigeration rather than this brand, and the cheap causes get ruled out before anybody says the words.

    • National range: $1,200–$2,400
    • Condenser, seal and airflow checked first, every time
    • Repair against replacement said plainly, with both figures
    What moves this figure
  • Compressor replacement cost

    The largest single repair on a refrigeration column — and the one where a second look at the diagnosis is worth the most money.

    • National range: $1,400–$2,800 all in
    • A compressor that hums and stops is often a relay
    • Built-in columns are not freestanding refrigerators
    What moves this figure
  • Ice maker and water repair cost

    What it costs when there is no ice or no water — and the note that a flashing filter symbol is three seconds on two buttons rather than a repair.

    • National range: repair $100–$225, replace $250–$600
    • The filter reset is free and it is often the whole answer
    • Small hollow cubes are supply, not the ice maker
    What moves this figure
  • Range hood repair cost

    The least expensive appliance on this site to repair, and we would rather say so than let a page imply otherwise.

    • Fan motor nationally: $100–$250
    • Filters are washable and are often the whole complaint
    • Where the blower lives decides the job
    What moves this figure
  • Appliance installation cost

    Above the usual figure for a reason: panel-ready columns and professional ranges are fitted to cabinetry rather than pushed into a gap.

    • Panels hung and aligned to the cabinets
    • Clearances done to specification, which prevents later errors
    • Setup included: water hardness, filter registration, temperatures
    What moves this figure

Why some of these are lower than you expect

The badge does not set the price. Being built in does.

A dishwasher drain pump costs the same part behind a cabinet panel as it does in a rental kitchen; the hour spent getting the panel off and back on square is the difference. That cuts both ways — the range hood on this site is genuinely inexpensive to repair, and most induction call-outs turn out to be a protection and cost the visit.

Where a figure is high, it is high for a reason we can name: refrigeration sealed-system work is built-in refrigeration, and that is physics and access rather than a premium on the name.

What each job involves
A pale stone worktop in a blue-black kitchen with a plain clipboard and a pen lying on it, the page blank, and a professional cooking range out of focus behind.

What moves a figure

Four things that decide which end of the range you land on

Every figure on this page is a starting point. What moves it on this badge is which half you are in — the cold half or the cooking half — and how the appliance is built into the room.

Or start from the machine

What a repair costs, by appliance

Ten kinds of appliance under one badge, and the money divides differently on each: cold work turns on whether the sealed system is involved, cooking work on which part and how it is reached. Each page carries the figures for that machine.

  • A stainless professional-style gas range with heavy cast-iron grates, set between white cabinets under a hood
    Professional · 30" 36" 48" 60"

    Professional ranges

    The appliance the brand is built around. A Professional range is two machines sharing a cabinet — a cooktop with star burners or an induction surface on top, and an oven underneath — and the two fail in completely different ways. Knowing which half you are describing shortens the visit before anybody arrives.

    • A burner that clicks and will not light
    • The oven not reaching or holding temperature
    • The griddle heating unevenly across the plate
    Range repair
  • Two pans simmering on a black induction cooktop set into a wooden island
    Freedom Induction · Masterpiece · Star burner

    Cooktops & rangetops

    Freedom induction is this brand's own idea: one continuous glass surface that finds the pans rather than four printed rings to line them up with. It changes what goes wrong and what the complaint sounds like — most of what we are called out for on these is the surface protecting itself, and it is usually right to.

    • A zone switching itself off mid-cook
    • The surface not recognizing a pan
    • Controls locked or answering a wet cloth
    Cooktop repair
  • A built-in grill module in a professional cooking deck: a heavy cast grate over a long burner, the flame visible between the bars, a light haze rising, dark stainless surround and near-black cabinetry beyond in cool midnight light.
    Grill module · Professional range · Rangetop · Legacy outdoor

    Grills & grill modules

    The grill module that drops into a Professional range or rangetop, and the outdoor grills this maker used to build. Both are a burner under a heavy grate rather than a burner under a pan, and that changes what fails: the grate, what falls through it, the igniter that sits in the line of everything that falls through it, and a burner that has to run hot for an hour without complaint.

    • A grill burner that lights and then goes out under load
    • Uneven searing across the grate
    • An igniter in the one place everything drips on
    Grill repair
  • A black double wall oven built into a wood column, the lower door standing open
    Masterpiece · Professional · Steam · Speed

    Wall ovens & steam ovens

    Built in at eye level, often two cavities in one cabinet, and increasingly one of the two is a steam oven with a water circuit of its own. "The oven is broken" almost always means one cavity of the pair, and which one narrows the job considerably.

    • Not heating or not holding temperature
    • The touch panel unresponsive after a long cycle
    • The door locked after a self-clean
    Oven repair
  • An open dishwasher loaded with clean crockery and mugs, standing open in a home kitchen
    Masterpiece · Star-Sapphire · Crystal Dry

    Dishwashers

    Quiet, panel-ready, and dried by a mineral chamber rather than a heating element. Two of the commonest complaints about these machines are the design working exactly as intended; the third is a filter nobody has taken out in a year.

    • Water standing in the tub after a cycle
    • Plastics coming out wet
    • The leak protection tripping and the machine refusing to run
    Dishwasher repair
  • A refrigerator standing open, both sides stocked with produce, dairy and cold cuts
    Freedom columns · French door · Under-counter

    Built-in refrigerators & columns

    A Freedom column is one cabinet holding one temperature — all refrigerator, no freezer in it — usually installed beside a freezer column as a matched pair behind panels that look like joinery. That makes the diagnosis cleaner and the access harder.

    • Not holding temperature
    • Frost or condensation inside the cabinet
    • A door that no longer seals against its panel
    Refrigerator repair
  • An open freezer drawer packed with bagged frozen fruit and vegetables
    Freedom columns · 18" 24" 30" 36"

    Freezer columns

    The other half of the pair, and the cabinet the ice maker lives in. A freezer column that is losing temperature announces itself long before the food is at risk — frost patterns change, the compressor runs longer, and the ice slows down first.

    • Not holding temperature, with the refrigerator column fine
    • Heavy frost building on one wall rather than evenly
    • Ice production slowing down or stopping altogether
    Freezer repair
  • Ice cubes filling the bin below two ice trays inside a freezer
    Inside the freezer column

    Ice makers

    There is no standalone ice machine on this brand. The ice maker is a module inside a freezer column, fed by a water line run through the cabinetry — so this page is about that module and the water reaching it, not about an undercounter machine behind a bar.

    • No ice at all, in a freezer that is holding temperature
    • Hollow, small or cloudy cubes from a full mold
    • Ice that has taken on a taste or a smell
    Ice maker repair
  • An undercounter wine cabinet with two glass doors and wooden racks, built into a stone-topped island
    Under-counter · Glass door · Two zones

    Wine reserves

    An undercounter reserve with a glass door and two temperature zones, built under a worktop rather than standing in a run. The glass door is a working part of the cabinet rather than a window, and a surprising share of what goes wrong is about it.

    • Temperature drifting or swinging between zones
    • Condensation on the inside of the glass
    • A compressor that runs and runs
    Wine cooler repair
  • A wall-mounted stainless range hood above a black gas cooktop in a white kitchen
    Pull-out · Chimney · Island · Downdraft

    Range hoods & ventilation

    Paired to the cooktop below it and, on the newer kitchens, talking to it — a hood that will not follow the burner is a connection question rather than a broken fan. Pull-out hoods add a mechanism that fixed ones do not have.

    • The fan not starting or running at one speed
    • The light out while the fan works
    • A hood that no longer follows the cooktop
    Range hood repair

Before you spend anything

Some of these are not repairs at all.

A flashing filter symbol is three seconds on two buttons. Wet plastics are how condensation drying works. An induction zone that shut down after a long session above a hot oven is a protection. Grease-saturated hood filters go in the dishwasher.

Call (305) 846-7685 with the model number and what it is doing, and we will tell you honestly whether it is one of those.

Questions about cost

What the figures here mean

Why publish a starting figure instead of a price?

Because one description covers several repairs that sit hundreds of dollars apart. A column running warm can be a choked condenser, a fan, an evaporator or a sealed system, and no single number is honest about all four. Each row is where that job starts for this equipment in South Florida; the figure for your appliance comes after somebody has seen it.

What does the diagnostic cost, and is it credited?

It starts at $95 and it is credited toward the repair when you go ahead. There is no separate charge for coming out.

Does Thermador cost more to repair than other makes?

The badge does not set the figure; being built in does. The same drain pump costs the same whether it is behind a cabinet panel or not, and what differs is the hour spent getting the panel off and back square. That is why the expensive lines on this page are the sealed-system ones and the deeply built-in ones, not simply the ones with the maker's name attached.

Some of these look too cheap to be repairs.

Several of them are not repairs. A condenser service, a descale and a filter change are maintenance, and they are on this page deliberately: they are the cheapest visits we make and the ones that most often prevent the expensive ones.

When would you tell me not to repair it?

When the work approaches what the appliance is worth. That happens most often on an older sealed system and on a compressor in a unit past its second decade. You get told that with the numbers in front of you rather than quoted into it.

In more detail

How Thermador service cost is worked out in South Florida

Built-in is the price, not the badge

A premium make suggests a premium bill, and on this equipment that is only half right. A pump is a pump. What makes a repair here cost what it does is that the appliance is fitted to the cabinetry rather than standing in a gap: a refrigeration column has finished panels on it, a 48-inch professional range has a wall of joinery on both sides, and both have to come out and go back square. That hour is real and it is in the figure.

The three things that move a number

The part. An igniter, a lamp, a damper or a door seal sits at the low end. A control board, a compressor or an evaporator sits at the high end, and the gap runs into four figures on refrigeration. The access. Everything above, plus whether the unit is at the end of a run or boxed in. The age. Parts for the current Freedom and Masterpiece equipment arrive quickly; parts for a Professional range of fifteen years old sometimes take a week, and occasionally do not exist.

What this climate adds to the bill

Condensers here run hard for more months of the year than almost anywhere, and near the water salt reaches coils, burner caps and igniters early. The consequence is not dramatic – it is that a service that would be annual elsewhere is seasonal here, and skipping it is what turns a cheap visit into an expensive one. That is the single most useful thing on this page for anybody who has just moved to South Florida.

Why the figure comes after the diagnosis

A firm price quoted before anybody has looked is a guess dressed up as a fact. The honest sequence is a published starting figure, an on-site diagnosis, then a written scope and price that you approve before anything is opened. The diagnostic is credited toward the work, so you are not paying twice for the same visit.

Get the figure for your appliance, not the average.

The diagnostic starts at $95 and comes off the bill when you go ahead with the work.

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards
Call (305) 846-7685