ThermadorRepair Miami

21 jobs, priced from, across nine appliance types

What we repair on a Thermador, and what each job involves.

Twenty-one jobs, each with what the work actually is, what it starts at, and what you can check yourself before paying anybody. Fridge repairs and cooking repairs are priced differently, and the pages say why.

  • 21 jobs, each with its own page
  • 9 appliance types we repair
  • from $95 diagnostic, credited to the repair
  • 87 error codes decoded on this site

The work

Every job we do, with what it starts at

A job specific to one appliance has its own page with that appliance attached. There is no grid of nine appliances times twenty-one jobs, because most of those combinations are not work anybody does.

  • A green circuit board with its capacitors and ribbon cable, close up
    from $95

    Diagnostic visit

    We read the codes on site — including the ones a machine with no display blinks out — then test the circuit the code names before saying anything about the repair. The fee is credited toward the work when you go ahead.

    • Codes and blink patterns read on site
    • The circuit tested before a part is named
    • Credited toward the repair
    What this involves
  • A hand lifting the cylindrical filter out of the sump of an open dishwasher, limescale on the mesh
    from $155

    Dishwasher drain repair

    Water standing in the bottom of the tub, or a cycle that stops with E24 or E25 on the display. The filter is free to check and it is the answer more often than the pump.

    • E24, E25 and the E61 labels decoded
    • Filter, hose and air gap checked before the pump
    • Panel removed and refitted properly
    What this involves
  • A technician kneeling at an open built-in dishwasher, working on the door with a screwdriver, tool case on the floor
    from $175

    Dishwasher leak repair

    Water in the base pan, a machine that will not start with E15, or a damp patch at the front of the cabinetry. The lockout has to clear before the job is finished.

    • E15 and the anti-flood lockout explained
    • Door seal, sump and hose connections tested
    • Cabinetry checked for what the water reached
    What this involves
  • The upper rack of an open dishwasher holding clean plates and cups
    from $245

    Crystal Dry and drying repair

    Dishes coming out wet on a machine that is supposed to dry them properly. On this make the drying is a zeolite chamber rather than a heating element, which changes both the diagnosis and the price.

    • E2120 and E2130 — the Crystal Dry conditions
    • Plastics-still-wet ruled out before any part is named
    • The assembly explained before it is quoted
    What this involves
  • A gloved hand with a sponge cleaning the shelf brackets inside an empty refrigerator
    from $155

    Descaling and maintenance

    South Florida water is hard, and this platform publishes a code for scale in the heat pump. Descaling, filter changes and the checks that keep a $155 service from becoming a $245 assembly.

    • E12 and E2060 — scale, published as a condition
    • Water and air filters changed and registered
    • Condenser and hood filters cleaned properly
    What this involves
  • A control board in its metal chassis with the loom folded back
    from $340

    Control board replacement

    A panel that does not respond, a board that fails its own memory check, or two boards that have stopped talking to each other. Tested before it is replaced, because boards are the most over-diagnosed part in this trade.

    • E005, E009, E010, E309, E310 decoded
    • The harness tested before the board is condemned
    • Option code set after the swap, which is easy to miss
    What this involves
  • The grill element glowing red across the roof of an oven cavity
    from $185

    Oven element and sensor repair

    An oven that will not heat, heats to the wrong temperature, or shuts itself down. The sensor and the element are two different repairs and the display usually says which.

    • E101 and E104 — sensor open and sensor shorted
    • E115, the one to take seriously
    • Calibration checked against a thermometer, not a feeling
    What this involves
  • A finger pressing the control beside the lit display of a stainless wall oven
    from $155

    Oven door lock repair

    A self-clean latch that will not lock, or worse, will not let go. Four published conditions belong to this one small assembly, which is why it has a page of its own.

    • E106, E107, E126 and their lower-cavity twins
    • The door opened without bending the frame
    • The latch tested through a full cycle
    What this involves
  • A technician holding the open door of a built-in refrigerator, tool belt at his waist
    from $165

    Door seal and hinge repair

    A door that does not sit square, a seal that has gone hard, or a professional door that has dropped on its hinges. The same job across the kitchen, and on built-in equipment it is adjustment as much as parts.

    • Seals tested with paper, not by eye
    • Hinges adjusted rather than replaced where they can be
    • Paneled doors reset to the cabinetry
    What this involves
  • A steel saucepan steaming on a black induction cooktop in a bright kitchen
    from $240

    Cooktop and induction repair

    A zone that stops mid-cook, a cooktop that will not recognize a pan, or a panel that has locked itself. Most induction calls are protections doing their job, and those cost the visit.

    • F0, F1, F2, F4 and the E9000 supply condition
    • Protections separated from failures before anything is ordered
    • The wireless probe treated as its own device
    What this involves
  • A frying pan resting on the black glass surface of a cooktop
    from $360

    Cooktop glass replacement

    A cracked or chipped glass top. The honest first question is whether the glass is sold separately for your model, because on some it is not.

    • Model checked for a separately available top
    • Cracks assessed for whether it is safe to use
    • Fitted without disturbing the countertop
    What this involves
  • Sealed gas burners and their control knobs, close up on a dark cooktop
    from $155

    Gas burner and igniter repair

    A burner that clicks and will not light, a flame that lifts off, or one Star Burner that has never been the same since a boil-over. Usually inexpensive parts and careful cleaning.

    • Clicking, lifting and yellow flame each diagnosed separately
    • Caps and ports cleaned and seated correctly
    • Spark module and electrodes tested individually
    What this involves
  • A stainless gas cooktop set into a light stone counter
    from $210

    Professional range repair

    A Pro Grand or Pro Harmony is a gas cooktop and an electric oven on one chassis, plus a griddle or a grill. That is two appliances' worth of failures behind one badge, and a diagnosis that has to say which half.

    • Cooktop half and oven half diagnosed separately
    • Griddle and grill treated as their own circuits
    • The chassis worked around in place, not dragged out
    What this involves
  • The condenser coils on the back of a refrigerator, with a technician reading beside it
    from $1,200

    Refrigeration sealed system repair

    A column that runs constantly and never reaches temperature. The most expensive thing on this site, and the one where the honest conversation about repair against replacement matters most.

    • Diagnosed properly before the word "leak" is used
    • The cheap causes ruled out first, every time
    • Repair against replacement, said plainly
    What this involves
  • An evaporator coil packed solid with ice
    from $1,400

    Compressor replacement

    The largest single repair on a refrigeration column, and the one that most deserves a second opinion before it is agreed to.

    • Starting components tested before the compressor is blamed
    • The whole system assessed, not just the part
    • Written figure before anything is ordered
    What this involves
  • A gloved hand wiping the door shelf of an open refrigerator
    from $220

    Refrigerator door and gasket repair

    A door alarm that keeps sounding, frost where there should not be any, or a paneled door that no longer lines up with the cabinets beside it.

    • The door alarm treated as evidence, not a nuisance
    • Paneled doors reset to the joinery line
    • Gaskets replaced only when adjustment will not do it
    What this involves
  • A technician kneeling beside a refrigerator with the kickplate off and his tools on the floor
    from $280

    Condenser and fan service

    The single most useful thing anybody does to built-in refrigeration in this climate, and the one most often left undone until something expensive happens.

    • Condenser cleaned properly, not blown around
    • Fans tested for speed as well as movement
    • Clearances checked against how it is built in
    What this involves
  • Crushed ice filling the frame
    from $155

    Ice maker and water repair

    No ice, not enough ice, or a water filter symbol that will not stop flashing. A useful share of these end at a filter and a three-second button hold.

    • The filter reset that clears a flashing symbol
    • Supply, pressure and freezer temperature checked first
    • Harvest problems separated from fill problems
    What this involves
  • A wine bottle resting on a metal rack in a warmly lit cabinet
    from $210

    Wine column repair

    A zone that will not hold its temperature, condensation on the glass, or a cabinet that has started running constantly. Dual-zone storage has more to go wrong than a refrigerator and different consequences when it does.

    • Each zone diagnosed separately
    • Condensation treated as a seal and airflow question
    • Vibration and light checked, because they matter here
    What this involves
  • Two hands lifting the metal grease filter out of a range hood
    from $135

    Range hood repair

    A blower that has stopped, lights that have gone, or a downdraft that will not rise. The cheapest appliance in the kitchen to repair, and we would rather say so than pretend otherwise.

    • Remote and inline blowers traced to the right place
    • Downdraft lift mechanisms diagnosed separately
    • E7010 — the hood-and-cooktop link explained
    What this involves
  • A fitter in safety glasses kneeling at a built-in wall oven, driving a screw into the cabinet frame
    from $195

    Installation

    Built-in equipment fitted properly: clearances that let it shed heat, panels that line up with the cabinets, and the settings that only get made once.

    • Clearances and ventilation done to specification
    • Cabinet panels hung and aligned
    • Water, gas and supply checked, not assumed
    What this involves

Why the figures are lower on some jobs than you expect

Built-in is what makes a repair expensive, not the badge.

A dishwasher drain pump is the same part whether it is behind a cabinet panel or not. What differs is the hour spent getting the panel off and back on square. The same is true the other way: refrigeration sealed-system work costs what it costs because it is built-in refrigeration, and that is physics rather than a premium on the name.

So the figures on these pages follow the work rather than the make. Where a job is genuinely cheap on this equipment — the hood, the filter reset, most induction call-outs — the page says so.

What each repair costs
A white kitchen island with open walnut shelving under a walnut splashback

Or start from the machine

By appliance, if you would rather

Ten kinds of appliance under one badge, and the work differs between them more than the job names suggest. Each page covers what fails on that one and what the visit involves.

  • A stainless professional-style gas range with heavy cast-iron grates, set between white cabinets under a hood
    Professional · 30" 36" 48" 60"

    Professional ranges

    The appliance the brand is built around. A Professional range is two machines sharing a cabinet — a cooktop with star burners or an induction surface on top, and an oven underneath — and the two fail in completely different ways. Knowing which half you are describing shortens the visit before anybody arrives.

    • A burner that clicks and will not light
    • The oven not reaching or holding temperature
    • The griddle heating unevenly across the plate
    Range repair
  • Two pans simmering on a black induction cooktop set into a wooden island
    Freedom Induction · Masterpiece · Star burner

    Cooktops & rangetops

    Freedom induction is this brand's own idea: one continuous glass surface that finds the pans rather than four printed rings to line them up with. It changes what goes wrong and what the complaint sounds like — most of what we are called out for on these is the surface protecting itself, and it is usually right to.

    • A zone switching itself off mid-cook
    • The surface not recognizing a pan
    • Controls locked or answering a wet cloth
    Cooktop repair
  • A built-in grill module in a professional cooking deck: a heavy cast grate over a long burner, the flame visible between the bars, a light haze rising, dark stainless surround and near-black cabinetry beyond in cool midnight light.
    Grill module · Professional range · Rangetop · Legacy outdoor

    Grills & grill modules

    The grill module that drops into a Professional range or rangetop, and the outdoor grills this maker used to build. Both are a burner under a heavy grate rather than a burner under a pan, and that changes what fails: the grate, what falls through it, the igniter that sits in the line of everything that falls through it, and a burner that has to run hot for an hour without complaint.

    • A grill burner that lights and then goes out under load
    • Uneven searing across the grate
    • An igniter in the one place everything drips on
    Grill repair
  • A black double wall oven built into a wood column, the lower door standing open
    Masterpiece · Professional · Steam · Speed

    Wall ovens & steam ovens

    Built in at eye level, often two cavities in one cabinet, and increasingly one of the two is a steam oven with a water circuit of its own. "The oven is broken" almost always means one cavity of the pair, and which one narrows the job considerably.

    • Not heating or not holding temperature
    • The touch panel unresponsive after a long cycle
    • The door locked after a self-clean
    Oven repair
  • An open dishwasher loaded with clean crockery and mugs, standing open in a home kitchen
    Masterpiece · Star-Sapphire · Crystal Dry

    Dishwashers

    Quiet, panel-ready, and dried by a mineral chamber rather than a heating element. Two of the commonest complaints about these machines are the design working exactly as intended; the third is a filter nobody has taken out in a year.

    • Water standing in the tub after a cycle
    • Plastics coming out wet
    • The leak protection tripping and the machine refusing to run
    Dishwasher repair
  • A refrigerator standing open, both sides stocked with produce, dairy and cold cuts
    Freedom columns · French door · Under-counter

    Built-in refrigerators & columns

    A Freedom column is one cabinet holding one temperature — all refrigerator, no freezer in it — usually installed beside a freezer column as a matched pair behind panels that look like joinery. That makes the diagnosis cleaner and the access harder.

    • Not holding temperature
    • Frost or condensation inside the cabinet
    • A door that no longer seals against its panel
    Refrigerator repair
  • An open freezer drawer packed with bagged frozen fruit and vegetables
    Freedom columns · 18" 24" 30" 36"

    Freezer columns

    The other half of the pair, and the cabinet the ice maker lives in. A freezer column that is losing temperature announces itself long before the food is at risk — frost patterns change, the compressor runs longer, and the ice slows down first.

    • Not holding temperature, with the refrigerator column fine
    • Heavy frost building on one wall rather than evenly
    • Ice production slowing down or stopping altogether
    Freezer repair
  • Ice cubes filling the bin below two ice trays inside a freezer
    Inside the freezer column

    Ice makers

    There is no standalone ice machine on this brand. The ice maker is a module inside a freezer column, fed by a water line run through the cabinetry — so this page is about that module and the water reaching it, not about an undercounter machine behind a bar.

    • No ice at all, in a freezer that is holding temperature
    • Hollow, small or cloudy cubes from a full mold
    • Ice that has taken on a taste or a smell
    Ice maker repair
  • An undercounter wine cabinet with two glass doors and wooden racks, built into a stone-topped island
    Under-counter · Glass door · Two zones

    Wine reserves

    An undercounter reserve with a glass door and two temperature zones, built under a worktop rather than standing in a run. The glass door is a working part of the cabinet rather than a window, and a surprising share of what goes wrong is about it.

    • Temperature drifting or swinging between zones
    • Condensation on the inside of the glass
    • A compressor that runs and runs
    Wine cooler repair
  • A wall-mounted stainless range hood above a black gas cooktop in a white kitchen
    Pull-out · Chimney · Island · Downdraft

    Range hoods & ventilation

    Paired to the cooktop below it and, on the newer kitchens, talking to it — a hood that will not follow the burner is a connection question rather than a broken fan. Pull-out hoods add a mechanism that fixed ones do not have.

    • The fan not starting or running at one speed
    • The light out while the fan works
    • A hood that no longer follows the cooktop
    Range hood repair

Not sure which one you need?

Tell us the model and what the display says.

Those two things are usually enough for us to say which job it is, what it involves and what it should cost — before anyone comes out. If there is no display, tell us what the lights are doing: on this equipment that is the code.

Questions about the work

Before you book

How much does a Thermador repair cost in Miami?

Every job on this page carries a starting figure for this equipment in South Florida. What moves it is the part, how deeply the appliance is built into the joinery, and the hours. The exact cost is confirmed after the on-site diagnostic and agreed with you in writing before anything is opened.

Is the diagnostic fee credited toward the repair?

Yes. It starts at $95 and comes off the bill when you go ahead with the work. If you decide not to, you pay the diagnostic and nothing else.

Why does a built-in cost more than a freestanding machine?

Not because of the badge - because of the access. A refrigeration column is fitted to the cabinetry rather than pushed into a gap, and a 48-inch range sits between finished ends. Getting to the back of either and putting it back square is real time, and it is quoted before the work rather than added afterwards.

Do you work on the professional ranges as well as the built-in refrigeration?

Yes, and they are two different trades on one badge. The cooking half is burners, igniters, elements and ventilation; the cold half is compressors, evaporators, sealed systems and controls. We cover both, and it is worth saying which one you have when you call.

Can you come out to a high-rise or a gated community?

Yes, and it is worth mentioning when you book. Service elevator windows and building rules shape the schedule as much as the repair does, so we plan the access in advance instead of discovering it on the day.

In more detail

What Thermador appliance repair involves, job by job

Twenty-one jobs, and the two trades behind them

This badge covers a whole kitchen and no laundry at all, and the equipment splits cleanly in two. On the hot side are the professional ranges, the rangetops, the induction and radiant cooktops, the wall and steam ovens and the ventilation. On the cold side are the built-in refrigerators, the freezer columns, the ice makers and the wine reserves. They fail differently, they are quoted differently, and the technician who is good at one is not automatically good at the other. Every row here says which it is.

Where the money actually goes

Three things carry the figure, and none of them is the name on the door. The part: an igniter, a fan or a door seal at one end, a control board or a sealed-system repair at the other. The access: this equipment is built into joinery, which is what a repair on it really costs. The hours: a column that has to come out and go back level is a longer appointment than a machine you can roll forward.

The cheapest calls are the ones that prevent the dear ones

A condenser choked with dust and salt is the least expensive line on this page and the one that keeps a compressor replacement away. Descaling a steam oven is a service rather than a repair, and it is the difference between a boiler that lasts and one that does not. Both of those are ordinary here rather than optional: near the water, condenser coils and burner hardware corrode years ahead of schedule.

What every visit includes

The condition is reproduced rather than assumed, the free causes are checked in front of you, and the scope and the figure are in writing before anything is opened. Where a repair approaches the value of the appliance, you are told that instead of being quoted. We guarantee the work we performed and the parts we fitted, across Miami-Dade, Broward and Palm Beach.

Book the visit, or ask first.

The diagnostic starts at $95 and comes off the bill when you go ahead with the work.

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards
Call (305) 846-7685