ThermadorRepair Miami

Error code

Thermador oven error code E000

Thermador error code E000: the control module and the user interface are not a matched pair, and the oven will not run until it is told which model it belongs to. What the code covers, what to check first, and what it does not tell you — on wall ovens & steam ovens.

  • From $95 diagnostic, credited to the repair
  • 59 cities and neighborhoods covered
  • OEM parts available on order
  • In writing the price, before anything is opened

What we can confirm

Code E000, from the manufacturer's own documentation

A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.

The code

E000

The control module and the user interface are not a matched pair, and the oven will not run until it is told which model it belongs to

What it narrows down to

Modules mismatched

What you are probably seeing

Oven controls not responding

Diagnostic

From $95, credited to the repair

What it looks like from the kitchen

A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.

  • A hand on the control dial of a wall oven whose display reads 180
    Often steam, not electronics

    Oven controls not responding

    A touch panel that ignores you, repeats itself, or reports a key held down. On a panel above a cooktop the usual cause is condensation, and it clears when the panel dries.

    • Panel unresponsive or erratic
    • A code about a key being held
    • Dead panel with no lights at all
    What it usually means

On the same appliance

What else belongs to the wall ovens & steam ovens

On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.

Other codes this appliance can display

Touch panel wet

Update interrupted

Panel electronics hot

Boards not talking

Panel program memory

Panel data memory

One key held down

Panel temp sensor

ON/OFF key not working

Several keys held

Cavity sensor open

Cavity sensor shorted

The same digits mean different things on different equipment. Search the full code list

In more detail

About Thermador oven error code E000

What this one means

The control module and the user interface are not a matched pair, and the oven will not run until it is told which model it belongs to.

The other ways your machine may say it

The same condition is published under more than one label, because it has been carried across generations of this appliance:

  • Three LEDs on the panel blinking out the digits 0, 0 and 0 — how a model with no digital display says it. On that machine, the lights are the code

What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

  • A replacement control module that has not been given its option code
  • A replacement user interface
  • The pairing between the two, which is set from the data plate

Worth doing before you call

  1. Find the model number on the data plate — the option code is read off it, and a technician will ask for it first

Then what

This one shows up after a board has been changed rather than out of the blue. Setting the option code is a service-mode step, and it is the whole repair when the parts themselves are sound.

This code is published for wall ovens & steam ovens. The full list of codes has the rest.

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards

Tell us the model number and what it is doing.

Call (305) 846-7685