Error code
Thermador oven error code E122
Thermador error code E122: the probe is reporting a temperature above the range it is allowed to report. What the code covers, what to check first, and what it does not tell you — on wall ovens & steam ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E122, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
E122
The probe is reporting a temperature above the range it is allowed to report
or call (305) 846-7685
What it narrows down to
Probe reads too hot
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Measure before you judge Oven runs hot or cold
Baking that has gone wrong at the same setting you have always used. A thermometer in the middle of the oven settles in twenty minutes what an argument about it never will.
- Everything browning too fast, or not at all
- A consistent offset at every setting
- A code in the E1 or E2 hundreds
On the same appliance
What else belongs to the wall ovens & steam ovens
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Touch panel wet
Update interrupted
Modules mismatched
Panel electronics hot
Boards not talking
Panel program memory
Panel data memory
One key held down
Panel temp sensor
ON/OFF key not working
Several keys held
Cavity sensor open
The same digits mean different things on different equipment. Search the full code list
In more detail
About Thermador oven error code E122
What this one means
The probe is reporting a temperature above the range it is allowed to report.
The other ways your machine may say it
The same condition is published under more than one label, because it has been carried across generations of this appliance:
- Three LEDs on the panel blinking out the digits 1, 2 and 2 — how a model with no digital display says it. On that machine, the lights are the code
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The probe
- The probe socket and the module behind it
- A probe left in the cavity during a clean cycle
What to try yourself
- Remove the probe from the oven before self-cleaning — it is not made for those temperatures
- Try a second probe if you have one
Then what
Probe codes are worth clearing before anything else is investigated, because a damaged probe reads wrongly in the middle of a bake and looks exactly like an oven that cannot hold temperature.
This code is published for wall ovens & steam ovens. The full list of codes has the rest.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards