ThermadorRepair Miami

Error code

Thermador dishwasher error code E0110

Thermador error code E0110: two parts of the machine's own electronics have lost each other. What the code covers, what to check first, and what it does not tell you — on dishwashers.

  • From $95 diagnostic, credited to the repair
  • 59 cities and neighborhoods covered
  • OEM parts available on order
  • In writing the price, before anything is opened

What we can confirm

Code E0110, from the manufacturer's own documentation

A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.

The code

E0110

Two parts of the machine's own electronics have lost each other

What it narrows down to

Electronics not talking

What you are probably seeing

Dishwasher will not start

Diagnostic

From $95, credited to the repair

What it looks like from the kitchen

A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.

  • A hand pressing the start control on the top edge of an open dishwasher door
    Often a protection

    Dishwasher will not start

    A machine with lights on that will not run, or one that shows nothing at all. On this platform a machine that refuses to start is usually protecting itself, and the code says which protection.

    • Lights on, nothing happens
    • A code showing before the cycle begins
    • Dead panel, no lights at all
    What it usually means

On the same appliance

What else belongs to the dishwashers

On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.

Other codes this appliance can display

Flow meter

No water arriving

Water level too low

Water in the base

Filter blocked

Drain blocked

Drain pump

Drain pump circuit

Heater electronics

Limescale in the heat pump

Heat pump heater

Heat pump blocked

The same digits mean different things on different equipment. Search the full code list

In more detail

About Thermador dishwasher error code E0110

What this one means

Two parts of the machine's own electronics have lost each other.

What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

  • The loom between the door and the base
  • Either board at the end of it

Worth doing before you call

  1. Cut power at the breaker for thirty seconds

Then what

Intermittent versions of this are usually the loom where it flexes at the door hinge.

This code is published for dishwashers. The full list of codes has the rest.

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards

Tell us the model number and what it is doing.

Call (305) 846-7685