ThermadorRepair Miami

Error code

Thermador dishwasher error code E12

Thermador error code E12: hard water has left enough scale in the heat pump to change how it heats. What the code covers, what to check first, and what it does not tell you — on dishwashers.

  • From $95 diagnostic, credited to the repair
  • 59 cities and neighborhoods covered
  • OEM parts available on order
  • In writing the price, before anything is opened

What we can confirm

Code E12, from the manufacturer's own documentation

A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.

The code

E12

Hard water has left enough scale in the heat pump to change how it heats

What it narrows down to

Limescale in the heat pump

What you are probably seeing

Dishwasher not cleaning properly

Diagnostic

From $95, credited to the repair

What it looks like from the kitchen

A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.

  • An integrated dishwasher, its door down, loaded with unwashed pans and plates
    Often the water, not the machine

    Dishwasher not cleaning properly

    Grit left on plates, a film on glasses, or detergent still sitting in the cup at the end. On hard water most of this is chemistry and loading before it is ever a part.

    • Grit or food left on the lower rack
    • A cloudy film on glassware
    • Detergent still in the dispenser afterwards
    What it usually means

On the same appliance

What else belongs to the dishwashers

On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.

Other codes this appliance can display

Flow meter

No water arriving

Water level too low

Water in the base

Filter blocked

Drain blocked

Drain pump

Drain pump circuit

Heater electronics

Heat pump heater

Heat pump blocked

Crystal Dry heater

The same digits mean different things on different equipment. Search the full code list

In more detail

About Thermador dishwasher error code E12

What this one means

Hard water has left enough scale in the heat pump to change how it heats.

The other ways your machine may say it

The same condition is published under more than one label, because it has been carried across generations of this appliance:

  • E12, E2060 — the same condition, on machines of different ages

What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

  • The heat pump's heat exchanger
  • The water softener, if it is empty of salt
  • Months of South Florida water

What to try yourself

  1. Run a descaler through an empty machine
  2. If the machine takes softener salt, refill it — the reservoir is in the tub floor

Then what

Miami-Dade water is hard enough that this is maintenance rather than a failure. It comes back if the salt stays empty.

This code is published for dishwashers. The full list of codes has the rest.

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards

Tell us the model number and what it is doing.

Call (305) 846-7685