Error code
Thermador oven error code E312
Thermador error code E312: the temperature sensor built into the control module is reading wrongly. What the code covers, what to check first, and what it does not tell you — on wall ovens & steam ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E312, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations.
The code
E312
The temperature sensor built into the control module is reading wrongly
or call (305) 846-7685
What it narrows down to
Control temp sensor
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Often steam, not electronics Oven controls not responding
A touch panel that ignores you, repeats itself, or reports a key held down. On a panel above a cooktop the usual cause is condensation, and it clears when the panel dries.
- Panel unresponsive or erratic
- A code about a key being held
- Dead panel with no lights at all
In more detail
About Thermador oven error code E312
What this one means
The temperature sensor built into the control module is reading wrongly. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
The other ways your machine may say it
The same condition is published under more than one label, because it has been carried across generations of this appliance:
- Three LEDs on the panel blinking out the digits 3, 1 and 2 — how a model with no digital display says it. On that machine, the lights are the code
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The control module, which carries the sensor
Worth doing before you call
- Note whether the oven is genuinely hot to the touch around the trim, which separates a sensor from real overheating
Then what
Like the panel's own sensor, this one measures the board and not the food, so it says nothing about baking temperature. It is read alongside the control-module overheating code.
This code is published for wall ovens & steam ovens. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards