Error code
Thermador oven error code E116
Thermador error code E116: the temperature probe circuit is not reading correctly. What the code covers, what to check first, and what it does not tell you — on wall ovens & steam ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E116, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations.
The code
E116
The temperature probe circuit is not reading correctly
or call (305) 846-7685
What it narrows down to
Meat probe error
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Measure before you judge Oven runs hot or cold
Baking that has gone wrong at the same setting you have always used. A thermometer in the middle of the oven settles in twenty minutes what an argument about it never will.
- Everything browning too fast, or not at all
- A consistent offset at every setting
- A code in the E1 or E2 hundreds
In more detail
About Thermador oven error code E116
What this one means
The temperature probe circuit is not reading correctly. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
The other ways your machine may say it
The same condition is published under more than one label, because it has been carried across generations of this appliance:
- Three LEDs on the panel blinking out the digits 1, 1 and 6 — how a model with no digital display says it. On that machine, the lights are the code
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The probe itself
- The socket in the cavity wall
- The standard probe module behind it
What to try yourself
- Unplug the probe and run the oven without it — the rest of the oven usually works normally
- Check the probe tip and plug for baked-on soil
Then what
A probe is the cheapest part on this list and the easiest thing to rule out, which is why it is worth trying a known-good one before anything inside the cavity is opened.
This code is published for wall ovens & steam ovens. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards