Error code
Thermador dishwasher error code E22
Thermador error code E22: the machine cannot pull water through the filter fast enough. What the code covers, what to check first, and what it does not tell you — on dishwashers.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E22, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
E22
The machine cannot pull water through the filter fast enough
or call (305) 846-7685
What it narrows down to
Filter blocked
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
The most common call Dishwasher not draining
Water standing in the bottom of the tub after a cycle. Two of the five causes come out by hand without tools, which makes this the symptom most worth five minutes before booking anything.
- Standing water after every cycle
- A code in the twenties, or an E61 label
- Dishes clean on top, wet and gritty below
On the same appliance
What else belongs to the dishwashers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Flow meter
No water arriving
Water level too low
Water in the base
Drain blocked
Drain pump
Drain pump circuit
Heater electronics
Limescale in the heat pump
Heat pump heater
Heat pump blocked
Crystal Dry heater
The same digits mean different things on different equipment. Search the full code list
In more detail
About Thermador dishwasher error code E22
What this one means
The machine cannot pull water through the filter fast enough.
The other ways your machine may say it
The same condition is published under more than one label, because it has been carried across generations of this appliance:
- E22, E-22 — the same condition, on machines of different ages
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The mesh filter under the lower arm
- The coarse filter above it
- Debris sitting in the sump
What to try yourself
- Lift out the filter assembly and wash it under the faucet with a soft brush
Then what
This one is genuinely a five-minute job, and it is the most common code on any dishwasher of this platform.
This code is published for dishwashers. The full list of codes has the rest.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards