Error code
Thermador cooktop error code E8206
Thermador error code E8206: the cooking sensor itself has failed. What the code covers, what to check first, and what it does not tell you — on cooktops & rangetops.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E8206, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
What it narrows down to
Sensor failed
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Test it with a magnet Induction will not recognize the pan
A zone that beeps and switches off, or never starts, with a pan sitting on it. A magnet settles this in two seconds and no repair will change the answer.
- Zone beeps and shuts off with a pan on it
- Some pans work and others do not
- A wireless probe reporting instead of the cooktop
On the same appliance
What else belongs to the cooktops & rangetops
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Zone overheated
Electronics overheated
All zones overheated
Control error
Panel wet or fouled
Power limited
Flex zone will not join
Supply voltage wrong
Not connected properly
No link to network or hood
Sensor battery low
Sensor lost
The same digits mean different things on different equipment. Search the full code list
In more detail
About Thermador cooktop error code E8206
What this one means
The cooking sensor itself has failed.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The sensor
Then what
A replacement probe rather than a repair to the cooktop.
This code is published for cooktops & rangetops. The full list of codes has the rest.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards