--- title: "Thermador error codes: what is on your display." description: "Thermador error codes decoded, including the ovens that blink theirs on three lights and the refrigeration columns that publish none and alarm instead." url: "https://thermadormiami.support/error-codes/" date_modified: "2026-08-18" --- # Error codes archive ## Thermador error codes: what is on your display. Type what you can see and the list filters to it — a number, an alarm, or the blinks on an oven with no display. Everything here is published by the manufacturer, on its website or in the service manual that ships inside the appliance, and this make says what its codes mean — so these pages go straight to what the code covers and what it still does not tell you. 87 — conditions, each with its own page 164 — code labels and signals covered 57 — you can act on yourself from $95 — diagnostic, credited to the repair ## Search the full list Codes are written differently across generations — E24, E-24, E6103, E61-03 and four flashing lights are all the same condition. Type whatever you can see; spaces and dashes do not matter, and the older labels find the page too. 87 conditions covering 164 published labels and signals: the manufacturer's own support pages, the Professional Series wall-oven service table, and the alarms the refrigeration columns use instead of codes. If your code is not here, it is not necessarily invalid — some are shown only in service mode, and some are specific to a model year. Call [(305) 846-7685](tel:+13058467685) with the model number and what the display is doing. ## On a machine with no display, the flashing lights are the code. The same condition is published under different labels depending on how old the appliance is. A dishwasher that cannot get water out shows **E24** or **E25** on an older machine and **E6102** or **E61-03** on a newer one. A Professional wall oven with no digital display has no number to show you at all: three small lights on the panel blink out the digits instead — one blink, one blink, five blinks is **E115** — and then all three light together to mark the end. So there is one page here per condition rather than one per label, and every page names the others, blinks included. Type any of them into the search above and you will land in the same place. ## Four things worth having in front of you Codes clear themselves, and the one thing nobody can recover afterwards is what the display actually said. These take a minute and they are usually the difference between one appointment and two. Write it down - Photograph the display, every character of it — a code with a colon and a second number means both halves matter - Take the model number from the plate: the door edge on a dishwasher, the frame behind the door on an oven, the inside wall on a refrigeration column Then try the free thing - Five minutes genuinely off at the breaker, not standby — it clears a real share of them - And note whether the code came back, because a code that survives that is a code that means something ## A pattern of flashing lights is a code, and we can read it. Plenty of this equipment has no display to show a code on — the Professional wall ovens in particular, which blink the digits out on three small lights, and the refrigeration columns, which use an alarm and a symbol rather than a number. How many blinks, in what order, or which symbol is lit, is as specific as any code. Tell us the model number and what the lights are doing, and we will tell you whether it is something to check yourself or something to book. **Call [(305) 846-7685](tel:+13058467685)**, or describe it in the form above. ## Start from the symptom instead If the display is not telling you anything useful, start from what the appliance is doing. Each of these covers the likely causes cheapest first and what to check yourself. ## What people ask us about error codes Is there a Thermador error code list I can download? — The manufacturer publishes its codes across its own support pages, one page per appliance. The list here is compiled from those so you can search all of them at once, with the older and newer labels for each condition side by side. We do not reproduce the manufacturer's own wording or repair procedures. My oven shows no code at all — just lights blinking. — On the Professional wall ovens without a digital display, that is the code. Three lights on the panel blink out its digits in order, left to right, then all three come on together for a second and the sequence repeats. Count each group of blinks and you have the number: one, one, five is E115. Those pages are in this archive alongside the ones with a display. How do I clear a code? — Five minutes genuinely off at the breaker clears a good number of them. Clearing a code does not fix what caused it — if it returns, it is telling you something. Photograph the display before you cut the power; the code will be gone afterwards. My refrigerator column has no code, only an alarm. — That is normal for this make: Thermador publishes no refrigeration error codes at all, and the column tells you things a different way — the temperature flashing with the alarm symbol, a door signal, a flashing water filter symbol, or a display that goes dark on low voltage. Those are in this archive as well, with what each one means and the self-test you can run before calling anybody. The code says what is wrong. Why would I need a technician? — Sometimes you do not, and about two thirds of the conditions here are things an owner can act on. What a published cause names is a circuit rather than a component: a drain code covers a filter, a pump, a loose cover, a kinked hose and an air gap, and four of those five you can handle yourself. ## Photograph the display, then tell us the model. Those two things are usually enough for us to say what is likely, what it involves, and what it should cost before anyone comes out. --- **[Read full article: Error codes archive](https://thermadormiami.support/error-codes-archive/)**